Brand Group C

Racing cams to suit large capacity, IR drag or track racing engines. Ideal in a light car with close ratio gears. Not for street cars. Primary lobe...

Nissan N1 main lobe with 20V spec side lobes Primary lobe specification is 252/248 Degrees advertised duration 10.20mm/8.30mm lift. 324/300 Degrees...

Custom camshafts for Nissan RB26DETT engines.

288/280 Degree split lobe cams to suit high RPM high HP engines especially good with E85 fuel.

260 Degree, high lift cams. Best split between response and horsepower. 260/260 Degrees advertised duration, 10.00mm/9.95mm lift.

Drag racing cams to suit high boost race engine using alcohol. These cams must use shimless buckets. 288/306 Degrees advertised duration. 11.55mm/1...

Drag racing cams to suit high boost engines in the 800-1000 HP range. These cams must use shimless buckets. 280/286 Degrees advertised duration. 11...

Drag racing cams to suit top end, high HP Turbocharged 3RZ-FE engines. 290/290 Degrees advertised duration. 10.60mm/10.20mm lift.

Stage 2 racing cams for well modified, turbocharged 3RZ-FE engine builds. 272/278 Degrees advertised duration. 9.95mm/9.95mm lift.

Stage 1 high performance cams for mild tuned, turbocharged 3RZ-FE engine builds. 264/272 Degrees advertised duration. 9.65mm/9.65mm lift.

K series race cams featuring lobe profiles designed specifically to suit high HP turbo charged applications. Primary/Intermediate lobe specificatio...

Racing cams to suit professionally built large displacement K series drag race engines and alcohol injected midget car racing engines. Primary/Inte...

K20-24 racing cams designed for track racing applications. Large low lobes require idle tuning by TPS. Super strong midrange power rough idle on pl...

Stage 1 racing cams to suit 2.0L and 2.4L builds for many applications. Great power gains in the whole range over the TSX cams. Primary/Intermediat...

The ultimate street turbo cams to suit 350-600HP engines. Valve timing is optimised for turbo setups helping produce a broader power band compared ...

Pro Import 1200HP-1600HP Cams. Best suited for alcohol fuels. 50lb+ of boost and 10,500rpm when used with KVS18K spring kit. Primary & Secondar...

Special design cams to suit high power turbocharged B series engines in the 600-1000HP range. Primary & Secondary lobe specifications are: Inta...

VTEC All Motor drag racing cams. Head modifications are required to avoid valve to valve contact. Ideal for long stroke engines. Primary & Seco...

H Series racing cams. Super strong midrange power rough idle on plenum manifolds. Primary/Intermediate lobe specifications are 250 & 254/250&am...

The ultimate stage 1 performance cams for B Series, requires KVS18K valve spring, ECU and exhaust upgrades. Primary & Secondary lobe specificat...

This head stud kit will suit BA/BF/FG/FGX, Turbo and Non Turbo Barras.