Camshafts

550hp 9500RPM racing cams. Designed to suit professionally built race engines. Requires Beehive spring and Ti retainer kit!

NZ Stock Car 450hp cams requires head clearance valve spring upgrade and VVTi Deleted. Retainer to seal clearance needs to be taken into account.

10.5/1+ Comp ITBs or good manifold 8000rpm. Head needs clearance around bucket bores for cams to turn. Requires spring upgrade & retainer to se...

Fast road cams Suits upgraded intake & exhaust needs tuneable ECU. Designed to work with stock head casting. Requires KVS1UZ spring.

These camshafts suit well built time attack and drag racing engines using E85 fuel.

High performance camshafts for street/strip and track racing engines using E85 or similar blend fuels.

The Ultimate 272 on the market dyno proven to be the best available to date. Suited for 450-700hp 40lb and 9500RPM with our recommended valve spring.

272 Degree advertised duration 10.00mm lift cams. These 272 degree high performance camshafts are designed with lower lift for use with the stock v...

Cams for the best all round performance. These suit 400-600HP racing engines.

Cams for mid range performance engines 350-550hp using E85 or similar blend fuels.

Cams for fast street engines with stock or small turbocharger or restrictor plate rally engines up to 8000 RPM and 25lb boost with our recommended ...

Stage 3 cam to suit fully built turbocharged competition racing engine builds.

Stage 2 cam to suit strong naturally aspirated engine builds. Ideal specification for fast street performance and time attack competition.

Stage 1 cam to suit turbocharged engine build for fast street performance.

Ultimate Street Performance Turbo cams. Suits 350HP-550HP engines. Primary lobe specification is 252/248 Degrees advertised duration, 10.20mm/8.30m...

Racing cams to suit large capacity, IR drag or track racing engines. Ideal in a light car with close ratio gears. Not for street cars. Primary lobe...

Nissan N1 main lobe with 20V spec side lobes Primary lobe specification is 252/248 Degrees advertised duration 10.20mm/8.30mm lift. 324/300 Degrees...

Stage 2 racing cams for well modified, turbocharged 3RZ-FE engine builds. 272/278 Degrees advertised duration. 9.95mm/9.95mm lift.

Stage 1 high performance cams for mild tuned, turbocharged 3RZ-FE engine builds. 264/272 Degrees advertised duration. 9.65mm/9.65mm lift.

K20-24 racing cams designed for track racing applications. Large low lobes require idle tuning by TPS. Super strong midrange power rough idle on pl...

Pro Import 1200HP-1600HP Cams. Best suited for alcohol fuels. 50lb+ of boost and 10,500rpm when used with KVS18K spring kit. Primary & Secondar...