Camshafts

Stage 3 racing cams to suit high HP engine buildsup to 32lb boost and 9000 RPM with the Kelford valve spring.

Stage 2 high performance cams. These suit 350-550HP engine builds up to 32lbs boost and 9000 RPM with the Kelford valve spring.

These stage 1 high performance camshafts can run with the stock valve spring at stock RPM limit or use our spring to run up to 32lb boost and 9000 ...

Stage 2 cams for turbocharged MZR engines (Non-DISI). Must Use KVS17X valve spring kit. Best suited for engines above 500hp.

Stage 1 cams for turbocharged MZR engines (Non-DISI). Suits OEM valve spring if using 1bar boost or less.

Stage 1 performance cams for near stock engines. Suits OEM valve spring.

Serious Turbo engines 750+hp Great with the use of E85. Spring upgraded needed KVS208 is required when using more than 30+ psi of boost and 8000rpm.

550hp 9500RPM racing cams. Designed to suit professionally built race engines. Requires Beehive spring and Ti retainer kit!

NZ Stock Car 450hp cams requires head clearance valve spring upgrade and VVTi Deleted. Retainer to seal clearance needs to be taken into account.

10.5/1+ Comp ITBs or good manifold 8000rpm. Head needs clearance around bucket bores for cams to turn. Requires spring upgrade & retainer to se...

Fast road cams Suits upgraded intake & exhaust needs tuneable ECU. Designed to work with stock head casting. Requires KVS1UZ spring.

These camshafts suit well built time attack and drag racing engines using E85 fuel.

High performance camshafts for street/strip and track racing engines using E85 or similar blend fuels.

The Ultimate 272 on the market dyno proven to be the best available to date. Suited for 450-700hp 40lb and 9500RPM with our recommended valve spring.

272 Degree advertised duration 10.00mm lift cams. These 272 degree high performance camshafts are designed with lower lift for use with the stock v...

Cams for the best all round performance. These suit 400-600HP racing engines.

Cams for mid range performance engines 350-550hp using E85 or similar blend fuels.

Cams for fast street engines with stock or small turbocharger or restrictor plate rally engines up to 8000 RPM and 25lb boost with our recommended ...

Stage 3 cam to suit fully built turbocharged competition racing engine builds.

Stage 2 cam to suit strong naturally aspirated engine builds. Ideal specification for fast street performance and time attack competition.

Stage 1 cam to suit turbocharged engine build for fast street performance.

Ultimate Street Performance Turbo cams. Suits 350HP-550HP engines. Primary lobe specification is 252/248 Degrees advertised duration, 10.20mm/8.30m...